• Article ID 000066869
  • Date Published 11/9/2024
  • Date Last Updated 26/02/2025

macOS Sequoia Compatibility Announcement

macOS Sequoia Compatibility Announcement

Updated February 2025

Thank you for choosing Nikon for your photographic needs.
We are pleased to announce the following regarding the compatibility of our Mac software products with macOS Sequoia.

Note: 

  • A dialog asking whether to allow an application to access files and folders may be displayed the first time it is launched. If this dialog is displayed, click OK each time.
  • Operation has been tested under macOS Sequoia 15.0. If any issues occur by further updating macOS Sequoia, we will announce them as soon as they are confirmed. 

Software

Version

CPU

Compatibility status

Camera Control Pro 2

2.37.1

Intel

We have confirmed that there are no problems with basic operation.

Apple Silicon

We have confirmed that there are no problems with basic operation (the software runs natively on Apple Silicon).

IPTC Preset Manager

1.3.0

Intel

We have confirmed that there are no problems with basic operation.

Apple Silicon

We have confirmed that there are no problems with basic operation (the software runs natively on Apple Silicon).

Nikon Message Center 2

2.5.2

Intel

Compatibility has been achieved.*1

Apple Silicon

Compatibility has been achieved (the software runs natively on Apple Silicon).*1

NX Studio
(including Nikon Transfer 2)

1.7.1

Intel

Compatibility has been achieved.*1

Apple Silicon

Compatibility has been achieved (the software runs natively on Apple Silicon).*1

NX Tether

2.2.0

Intel

Compatibility has been achieved.

Apple Silicon

Compatibility has been achieved (the software runs natively on Apple Silicon).

Webcam Utility

1.1.0

Intel

Issue *2 below occurs.

Apple Silicon

Issue *2 below occurs.

Wireless Transmitter Utility

1.13.0

Intel

Compatibility has been achieved.

Apple Silicon

Compatibility has been achieved (the software runs natively on Apple Silicon).

*1 We have confirmed an issue that prevents the camera from being recognized by Nikon Transfer 2 when the memory card contains HEIF images. We are currently looking into this issue.
*2 Webcam Utility cannot be used after updating macOS Sequoia to version 15.0. We are currently looking into this issue.

 

We do not intent to provide compatibility with the following applications.

  • Camera Control Pro Ver.1.x 
  • Capture NX 2
  • Capture NX Ver.1.x 
  • Capture NX-D
  • KeyMission 360/170 Utility
  • Nik Color Efex Pro 2.0 
  • Nik Color Efex Pro 3.0 Complete Edition 
  • Nik Color Efex Pro 3.0 Select Edition 
  • Nikon Capture series 
  • Nikon Scan series 
  • Nikon Transfer Ver.1.x
  • Nikon View series 
  • PC-PJ Transfer
  • Picture Control Utility 2
  • PictureProject 
  • PictureProject COOLPIX Remote Control 
  • Short Movie Creator
  •  Thumbnail Selector
  • ViewNX 2（including Movie Editor）
  • ViewNX Ver.1.x 
  • ViewNX-i (including ViewNX-Movie Editor and Nikon Transfer 2)
  • Wireless Camera Setup Utility
  • Wireless Connecting Utility
  •  WT-3 Setup Utility

In addition, we do not plan to provide compatibility for other software, or SCSI- or serial-connection products. We apologize for any inconvenience this may cause. For more information regarding this matter, please contact Nikon Customer Support. 

We sincerely hope that you will continue to choose Nikon for your photographic needs.

Contact Customer Support